How to Choose Rechargeable AA Batteries and a Charger: Capacity, Cycles and 3 Options Worth a Look

Four AA batteries

Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Links to Amazon in this post may earn us a commission at no extra cost to you. Learn more.

This guide is for anyone who is still feeding disposable AA batteries into game controllers, remotes, flashes, flashlights and wireless mice, and wondering whether rechargeables are worth it. They usually are for devices you use often, but the label on the pack matters. Capacity, the number of recharges and how long a cell holds its charge pull in different directions. Everything below comes from manufacturer specs and published reviews; we did not test these ourselves.

What matters when buying

Low self-discharge is the feature that makes rechargeables practical. Older nickel-metal-hydride (NiMH) cells could lose a lot of charge sitting in a drawer. Modern pre-charged cells are built to hold most of it for a year or more, which is why they work in remotes and emergency kit as well as in heavy-use gadgets.

Capacity and cycle life are a trade-off. A higher milliamp-hour (mAh) rating means longer runtime per charge, but in Panasonic’s range the higher-capacity cell is rated for fewer recharges. If a device drains batteries quickly, such as a camera flash, capacity helps. If you swap cells in and out of low-drain devices for years, cycle life helps.

The charger is half the purchase. A charger that handles each cell separately is kinder to mixed or partly used batteries than one that charges them in pairs. Check how many slots it has, whether each has an indicator, and which batteries the manufacturer says it supports.

What to ignore: huge capacity claims on unbranded packs without a minimum rating, and cycle counts quoted without the test standard behind them. Panasonic itself notes that its cycle figure depends on the test standard used.

A pile of different types of batteries
Photo: John Cameron / Unsplash

Quick picks

Panasonic eneloop AA: for everyday gadgets and long storage

Who it suits: people replacing alkalines in remotes, controllers, toys and wireless mice.

  • Panasonic lists a minimum capacity of 1900 mAh (up to 2000 mAh) and says the cells can be recharged up to 2100 times, though the page’s footnote for that claim was not available to us.
  • Panasonic says they retain 70% of their charge after 10 years in storage and come pre-charged with solar energy.
  • Trusted Reviews recommends them as general-purpose replacements for alkaline cells and measured stable capacity over 50 charge cycles in its test.

Drawback: Trusted Reviews calls them expensive and says capacity is lower than much of the competition. View Panasonic eneloop AA on Amazon.

Panasonic eneloop pro AA: for heavy-use devices

Who it suits: photographers and anyone with high-drain gear such as camera flashes.

  • Panasonic lists a minimum capacity of 2500 mAh (2450 mAh in some regions) and retention of 85% after one year at 20 °C.
  • They are rated for use from -20 °C to 50 °C and are designed for high-drain devices, with Panasonic claiming a flash recovery time of 3.3 seconds versus 76 seconds for a standard alkaline in its own test.
  • Digital Camera World says it is a better choice than standard eneloop for high-current devices, citing more than 300 full-power flashes in its test, against about 170 on alkalines.

Drawback: up to 500 recharges under the 2011 test standard (Panasonic says 150 under the 2017 standard), and Digital Camera World lists a higher price as a con. Panasonic also warns against using them in devices with an airtight battery compartment, such as waterproof flashlights. View Panasonic eneloop pro AA on Amazon.

Panasonic BQ-CC55 charger: for a flexible four-slot setup

Who it suits: anyone buying eneloop cells who wants each one charged and monitored separately.

  • Panasonic lists four slots, each with its own three-color LED, and says it charges one to four AA or AAA cells in any combination, including mixed capacities.
  • Approximate charge times are about 1.5 hours for one or two eneloop AA cells and 3 hours for three or four, or 2 and 4 hours for eneloop pro AA, depending on temperature and battery condition.
  • Panasonic lists safety timers, overheat, short-circuit and reverse-polarity protection, and LED flashing that signals a battery nearing end of life.

Drawback: Panasonic’s page lists only eneloop and eneloop pro cells as supported, and the input is AC only, so it will not charge from a USB port. We found no independent review to cite for this charger, so this entry rests on Panasonic’s specifications. View Panasonic BQ-CC55 on Amazon.

Common mistakes

  • Putting rechargeable cells in a sealed device. Panasonic specifically warns about airtight compartments.
  • Choosing the highest mAh by default. If you rarely use a device, cycle life and storage matter more.
  • Mixing old and new cells, or cells at different charge levels, in one device.
  • Using a cheap charger that only charges in pairs, then wondering why one cell dies early.
  • Expecting 1.5 V. NiMH cells are nominally 1.2 V, which Panasonic says is slightly lower than equivalent dry batteries. Most devices handle that, but a few do not.

Bottom Line

For most households, standard eneloop AA cells and an individual-cell charger cover remotes, controllers and mice. If you shoot with flashes or run other power-hungry gear, eneloop pro’s higher capacity is the draw, at the cost of fewer rated recharges. Related reading: our guides to wireless mice, wireless gaming mice and power banks.

FAQ

Are rechargeable AA batteries worth it?

For devices that eat batteries regularly, such as controllers, wireless mice and flashes, usually yes, because each cell can be recharged hundreds of times. For rarely used items such as a smoke alarm, check the device manual first.

What is the difference between eneloop and eneloop pro?

According to Panasonic, the standard AA has a minimum capacity of 1900 mAh and is rated for up to 2100 recharges, while the pro has a minimum of 2500 mAh (2450 mAh in some regions) and is rated for up to 500. The pro holds 85% after a year, while the standard holds 70% after ten years.

Can I charge eneloop batteries in any charger?

Use a charger made for NiMH cells and follow the battery maker’s guidance. Panasonic’s BQ-CC55 page lists eneloop and eneloop pro as the supported batteries.

Featured image: Claudio Schwarz / Unsplash.

0Comments

No comments yet. Be the first to share your thoughts below.

Join the Discussion

Your email will not be published. New comments are reviewed before they appear.